Jump to content
  • Member Statistics

    17,614
    Total Members
    7,904
    Most Online
    Vesuvius
    Newest Member
    Vesuvius
    Joined

Tracking Jan 7 coastal storm. Lingering compression/flow velocity has not lent to consensus, but it seems at 30 hours out.. finally?


Typhoon Tip
 Share

Recommended Posts

3 minutes ago, CoastalWx said:

I have a feeling there won't be a huge difference across the region. Between some fluff inland, and maybe lower ratio stuff, but higher QPF near coast. 

I actually like my spot for a potential jack...far enough east for good QPF but far enough west and a little elevation for decent ratios. We'll see though....interior SE MA near the usual suspects like Foxborough are primed too for some heavy bands and their few hundred feet will help ratios some.

  • Like 2
  • Weenie 1
Link to comment
Share on other sites

Just now, ORH_wxman said:

I actually like my spot for a potential jack...far enough east for good QPF but far enough west and a little elevation for decent ratios. We'll see though....interior SE MA near the usual suspect like Foxborough are primed too for some heavy bands and their few hundred feet will help ratios some.

Yeah I could see that. If winds switch N quickly here, I think it would be pretty good too. But whatever....just happy to get a solid event.  

  • Like 1
Link to comment
Share on other sites

Just now, CoastalWx said:

Yeah I could see that. If winds switch N quickly here, I think it would be pretty good too. But whatever....just happy to get a solid event.  

MPM could complain his way to a jackpot too there in Westborough.

  • Haha 3
Link to comment
Share on other sites

Trying to learn more about FGEN products here. Would anybody care to briefly explain how to use the various FGEN products at varying heights to predict where banding develops? In other words, in a setup like this, should I be looking at 700mb FGEN, 850mb FGEN, 900-500mb average, 800-600mb average? I'm taking a wild guess and perhaps the layer(s) which is the closest layer at which DGZ is located in?

Link to comment
Share on other sites

Just now, Jenkins said:

Trying to learn more about FGEN products here. Would anybody care to briefly explain how to use the various FGEN products at varying heights to predict where banding develops? In other words, in a setup like this, should I be looking at 700mb FGEN, 850mb FGEN, 900-500mb average, 800-600mb average? I'm taking a wild guess and perhaps the layer which is the closest layer at which DGZ is located in?

Usually banding is just N of best H7 fronto

  • Like 2
Link to comment
Share on other sites

Just now, Jenkins said:

Trying to learn more about FGEN products here. Would anybody care to briefly explain how to use the various FGEN products at varying heights to predict where banding develops? In other words, in a setup like this, should I be looking at 700mb FGEN, 850mb FGEN, 900-500mb average, 800-600mb average? I'm taking a wild guess and perhaps the layer which is the closest layer at which DGZ is located in?

I usually take the 600-800 avg...often the best banding will end up on the NW edge of that. Not all the time, but frequently. modeling best fronto isn't the easiest thing for guidance...it's pretty easy to be off like 25 miles on a short term forecast...but obviously that can make a huge difference in amounts if someone was supposed to be under that but it ended up 25 miles east.

  • Like 7
  • Thanks 1
Link to comment
Share on other sites

1 minute ago, ORH_wxman said:

I usually take the 600-800 avg...often the best banding will end up on the NW edge of that. Not all the time, but frequently. modeling best fronto isn't the easiest thing for guidance...it's pretty easy to be off like 25 miles on a short term forecast...but obviously that can make a huge difference in amounts if someone was supposed to be under that but it ended up 25 miles east.

hope it moves 25 miles west I think ill be on the edge while you get nailed

  • Weenie 1
Link to comment
Share on other sites

Just now, Jenkins said:

Trying to learn more about FGEN products here. Would anybody care to briefly explain how to use the various FGEN products at varying heights to predict where banding develops? In other words, in a setup like this, should I be looking at 700mb FGEN, 850mb FGEN, 900-500mb average, 800-600mb average? I'm taking a wild guess and perhaps the layer which is the closest layer at which DGZ is located in?

I tend to look at H7 more because that corresponds to the snow growth area typically. You typically want to be just on the colder side of the fronto packing shown. The atmosphere typically has a circulation up and over that packing, so you will typically see the band of heavy snow just on the colder side of that circulation. 

 

In the image below I circled where it might theoretically be in the snap shot.

image.png.55c25744b69ff03aa8c952b31d6b3722.png

  • Like 15
Link to comment
Share on other sites

But Will is right, it could be higher or lower depending on the temperatures. A quick and dirty way of doing it is looking at temperature gradients. If 700mb looks warm and the DGZ is higher, look at the 500mb temps. Your nice banding probably is in between...say 600mb. You'll just need to interpolate a bit. 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

3 minutes ago, CoastalWx said:

I tend to look at H7 more because that corresponds to the snow growth area typically. You typically want to be just on the colder side of the fronto packing shown. The atmosphere typically has a circulation up and over that packing, so you will typically see the band of heavy snow just on the colder side of that circulation. 

 

In the image below I circled where it might theoretically be in the snap shot.

image.png.55c25744b69ff03aa8c952b31d6b3722.png

At some point, we just need to start saying "the climatologically favored area"

  • Haha 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...