Jump to content
  • Member Statistics

    17,612
    Total Members
    7,904
    Most Online
    Vesuvius
    Newest Member
    Vesuvius
    Joined

August 2019 Discussion


Torch Tiger
 Share

Recommended Posts

53 minutes ago, CT Rain said:

Wow - just pulled up the data on GR. That's one hell of a QLCS. 

Microburst or straight line  here, my first summer up here.

A long-lived supercell, which formed in eastern New York during the late evening of the 9th, moved across northern Connecticut during the early morning hours of the 10th. The storm intensified as it entered Hartford County, and downed wires in South Windsor. As the storm entered Tolland County, there were many reports of dime to nickel size hail, but hail as large as golf balls fell in Vernon and Willington. In Windham County, the storm downed trees and large branches from Hampton to East Killingly. As this supercell moved east into Rhode Island and southeast Massachusetts, it produced more widespread wind damage and large hail.

  • Like 1
Link to comment
Share on other sites

13 minutes ago, Ginx snewx said:

Microburst or straight line  here, my first summer up here.

A long-lived supercell, which formed in eastern New York during the late evening of the 9th, moved across northern Connecticut during the early morning hours of the 10th. The storm intensified as it entered Hartford County, and downed wires in South Windsor. As the storm entered Tolland County, there were many reports of dime to nickel size hail, but hail as large as golf balls fell in Vernon and Willington. In Windham County, the storm downed trees and large branches from Hampton to East Killingly. As this supercell moved east into Rhode Island and southeast Massachusetts, it produced more widespread wind damage and large hail.

It's definitely a QLCS but an embedded supercell (it was a beast) developed over Hartford and moved east into Mass. 

Link to comment
Share on other sites

On 8/2/2019 at 5:01 PM, Dr. Dews said:

Next Wednesday has a shot ...

 We pray

  An upper trough will pivot eastward on Wednesday, spreading 30-40 kt
   midlevel southwesterly flow across the region. Surface dewpoints in
   the mid 60s to low 70s will be transported northward across the
   Piedmont of NC/VA into the Mid-Atlantic vicinity. Strong heating
   through this corridor will result in moderate to strong instability
   and thunderstorms will develop over higher terrain during the early
   afternoon. As convection spreads eastward, some guidance suggests
   upscale growth is possible, with one or more line segments tracking
   across the region. Effective shear is somewhat marginal, around 25
   kt, and midlevel lapse rates modest. But higher PW values and
   pockets of steep low-level lapse rates could be sufficient for storm
   organization along outflows and areas of damaging wind will be
   possible. At this time, its still unclear where greater potential
   will develop and will maintain Marginal probs at this time, though
   upgrades could be needed in subsequent updates if current trends
   continue.
Link to comment
Share on other sites

So----here's my remedial question of the day......

I need to get some type of cheap station/sensor for mby readings.  The challenge is where to place the sensor.  I'm not going to put a stake in the yard to mount it.  So, here are my options:

1) affix to the house itself (north side to minimize direct sun???)

2) there is a 15' high deck off the west side--I could mount it on one of the outer piers, keeping it away from the house

3) we have a 2-story unheated detached garage to which I could affix it.

4) there is a stockade-type privacy fence in the back (east facing)

5) there is a utility pole in the back corner with some growth around it (I want to keep the growth to mask the pole a little)

Note that the house and garage are both white so that would mitigate some of the structural heating.

Feedback/recommendations are welcome.

Link to comment
Share on other sites

15 minutes ago, moneypitmike said:

So----here's my remedial question of the day......

I need to get some type of cheap station/sensor for mby readings.  The challenge is where to place the sensor.  I'm not going to put a stake in the yard to mount it.  So, here are my options:

1) affix to the house itself (north side to minimize direct sun???)

2) there is a 15' high deck off the west side--I could mount it on one of the outer piers, keeping it away from the house

3) we have a 2-story unheated detached garage to which I could affix it.

4) there is a stockade-type privacy fence in the back (east facing)

5) there is a utility pole in the back corner with some growth around it (I want to keep the growth to mask the pole a little)

Note that the house and garage are both white so that would mitigate some of the structural heating.

Feedback/recommendations are welcome.

Just use BDL temps in summer

  • Haha 2
Link to comment
Share on other sites

56 minutes ago, moneypitmike said:

So----here's my remedial question of the day......

I need to get some type of cheap station/sensor for mby readings.  The challenge is where to place the sensor.  I'm not going to put a stake in the yard to mount it.  So, here are my options:

1) affix to the house itself (north side to minimize direct sun???)

2) there is a 15' high deck off the west side--I could mount it on one of the outer piers, keeping it away from the house

3) we have a 2-story unheated detached garage to which I could affix it.

4) there is a stockade-type privacy fence in the back (east facing)

5) there is a utility pole in the back corner with some growth around it (I want to keep the growth to mask the pole a little)

Note that the house and garage are both white so that would mitigate some of the structural heating.

Feedback/recommendations are welcome.

Sensor or full station , if you go full station, if wireless you need to be able to change batteries.  Just a temp sensor , in the shade 

Link to comment
Share on other sites

2 hours ago, moneypitmike said:

So----here's my remedial question of the day......

I need to get some type of cheap station/sensor for mby readings.  The challenge is where to place the sensor.  I'm not going to put a stake in the yard to mount it.  So, here are my options:

1) affix to the house itself (north side to minimize direct sun???)

2) there is a 15' high deck off the west side--I could mount it on one of the outer piers, keeping it away from the house

3) we have a 2-story unheated detached garage to which I could affix it.

4) there is a stockade-type privacy fence in the back (east facing)

5) there is a utility pole in the back corner with some growth around it (I want to keep the growth to mask the pole a little)

Note that the house and garage are both white so that would mitigate some of the structural heating.

Feedback/recommendations are welcome.

Get it at least 5' above the roof ridgeline

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...