Jump to content
  • Member Statistics

    17,608
    Total Members
    7,904
    Most Online
    Vesuvius
    Newest Member
    Vesuvius
    Joined

Winter model performance discussion


cae
 Share

Recommended Posts

Here's the LWX preliminary snowfall map for this event.

tiVXluy.jpg

I'll go through the major models below, and then I'll write up some extra thoughts at the end. 

The below gifs show the runs from 12z 1/09 to 18z 1/12.  Some snow had fallen in the western areas by 18z 1/12, but I chose 18z instead of 12z so we could get more model runs in. 

The precip totals are from the start of the run to 12z 1/14.  For the RGEM and HRDPS, I include runs that end as early as 00z 1/14 because they only go out to about 48 hours. 

Link to comment
Share on other sites

Euro

Here's the precip analysis.  The Euro predictions are below that, using the same color scale.

cUBandM.jpg

SzZJ7pJ.gif

Again the Euro was too dry around us, only catching on near the end.  For the first part of the storm (up to 12z on Saturday), it was arguably the worst model.  Below is its 24-hour total precip forecast at 12z on Friday.

1JXeY6W.png

This is what we actually got over those 24 hours.

vcIjB0u.jpg

Another global did much better with the first part of the storm.  We'll get to that below.

Link to comment
Share on other sites

GGEM

From the model discussion thread:  "I tell you what too... CMC has consistently pointed at higher totals (little ebb and flow) and better coastal enhancement. The 12z is even better than 0z lol. If it scores a coup on the gfs/euro I’ll build a mini shrine to it on my desk."

In some ways this was similar to the last storm, with the GGEM generally showing higher totals around Washington than most of the other globals.  It ended up being too dry in the end, but for a while it looked like a wet outlier.

cUBandM.jpg

Zjk0Wvn.gif

Link to comment
Share on other sites

FV3

The best global model overall might have been the FV3.  Like the ICON, it looked pretty good at the end, but unlike the ICON it had been fairly consistent.

8fKdXJV.jpg

A6GFndx.gif

 

I mentioned above that the Euro was arguably the worst model for the first 24 hours of the storm.  The FV3 was arguably the best.  Below is the actual precip totals from the first 24 hours followed by the FV3's final 24-hour prediction.

qXaV3tr.jpg

vHoNJcc.png

Looks good to me.

Link to comment
Share on other sites

REPS (RGEM ensemble)

I added the REPS to this one because I think this was a good example of why a short-range ensemble is useful.  At 00z on 1/11, less than 48 hours before snow started falling, the Euro, Ukie, and GFS had DC getting less than 0.3" of precipitation.  The wettest global was the GGEM, which showed DC in the 0.4" - 0.6" contour.  The RGEM and HRDPS were both out of range, and the NAMs effectively were.  This is what the 3k NAM was showing at the time, with precip having moved offshore at the end of the run.

kRT4bcR.png

But the RGEM ensemble mean put DC in the 0.6" - 0.8" contour, which was even wetter than the GGEM.  In retrospect, it was a good sign that this system still had a lot of upside potential.  At the time it was an outlier, but it arguably ended up busting low.  The below images use the weather.us color scale.

hjXL1ym.png

cUBandM.jpg

sbG8zHh.gif

Link to comment
Share on other sites

Final thoughts

The FV3 might have been the most impressive global model.  It and the GGEM were consistently the wettest models, but the FV3 did better than the GGEM at game time.  The Euro and ICON eventually caught on, but only very late. 

Of the mesos, the 3k NAM was probably the best once it got in range.  Below is the actual snowfall, compared with the 3k NAM runs from 12z Saturday. 

ASnq8SK.jpg

wyVCfZU.png

Kuchera was similar.

VYNKVJt.png

However even if you'd looked at the above maps, you might have been surprised by the 1 foot+ numbers that were put in in Central MD.  It turns out that area outperformed not just on precip, but on ratios.  If you divide the snow analysis by the precip analysis, you can get maps of the ratios.  Unfortunately I can only get these for 24 hours at a time.  Here's the 1st part of the storm (12z Saturday to 12z Sunday).

mvWk8Ok.jpg

And here's the 2nd (12z Sunday to 12z Monday).

fubr3Fi.jpg

According to those maps, parts of the jackpot zone in central MD saw greater than 15:1 ratios on Sunday.  Kuchera was generally more like 11:1.  This is one of the limitations of the Kuchera method.  I believe it only looks at the maximum column temperatures, and it doesn't consider factors like lift in the dendritic growth zone. 

  • Like 4
  • Thanks 1
Link to comment
Share on other sites

50 minutes ago, gopper said:

cae,  excellent post analysis.  You obviously put a good deal of time into collecting all of the map comparisons!  Always interesting to see which models are picking up on certain aspects of a storm.  Thank You!

Thanks!  The new format takes a bit more time than the old one did, but I think it works better.  I'm working on streamlining the process.  Sometimes gathering the maps is a good way to make use of the time while waiting for the radar to fill in.

  • Like 3
Link to comment
Share on other sites

  • 1 year later...

I stumbled upon this thread by chance trying to look for a precipitation analysis method for an evaluation with respect to multiple (44) winter weather events. The idea was that if I conduct MODE analysis between StageIV precipitation w.r.t modeled hourly precipitation, I can determine the accuracy of banded precipitation vs. several modeling systems (ICLAMS/WRF). Unfortunately, it's recommended (strongly suggested) by the developers to avoid such a methodology due to poorly ingested liquid water equivalent observations under snowy conditions... The rain gauges struggle to observe liquid water equivalent when snow is falling... I'm now considering the RTMA, URMA, or possibly, a satellite derived product instead.

"Each River Forecast Center (RFC) has the ability to manually quality control the Multisensor Precipitation Estimates (MPE) precipitation data in its region of responsibility before it is sent to be included in the Stage IV mosaic. The precipitation values,however, are not intentionally modified downwards during snow events. Rather, due to inaccurate measuring of liquid equivalents at many gauge locations (e.g., a lack of the equipment to melt and measure the frozen precip), zero or very low values are reported at these locations. These "bad" gauge values then go into the MPE algorithm, resulting in liquid precip estimates that are too low during winter storms. There are also problems with zero or too low precipitation values at many RFC gauge locations even outside of heavy snowfall events."

"There are problems with the RFC precip data in the eastern U.S. during heavy snow events. While ASOS stations have the equipment to melt the snow and derive the liquid equivalent precip, the RFC stations in the East do not. So when there are big snowfall events such as the January 2016 blizzard, the snow accumulations get recorded, but the corresponding liquid equivalents often come in as zero or near zero amounts, which are incorrect."

If you're curious (Model Evaluation Tool for MODE analysis): https://dtcenter.org/sites/default/files/community-code/met/docs/user-guide/MET_Users_Guide_v8.1.2.pdf

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...